Library Planter Boxes
Add some life to your library with these planter boxes! Made out of pine and finished with an exterior cedar stain, these two boxes are ready to be added to your library upon delivery. Installation with a Phillips screw takes only a few seconds, and you can easily remove the boxes from your library during the winter months or in the event of severe weather.
Instructions for installing a box on each side of your library:
- In the center of your library's side wall, and 3 1/8" above your library's side wall trim, insert your Phillips screw with a drill and a Phillips drill bit until 1/4" remains sticking out from the wall. (Drill and drill bit not included).
- Using the mounting hole on your planter box, slide it onto the Phillips screw head making sure it's flush along the the side wall and along the bottom of the side wall trim. If it's not flush with the side wall, the screw may need to be screwed slightly further into the wall.
- Repeat on other side.
- Sold as a set of two
- Pine finished with exterior Sherwin Williams cedar stain
- Dimensions are 3 7/8" tall x 5 7/8" wide x 7 3/8" deep